Slab Foundation Repair in Houston, TX
Most homes built in the Houston area since the 1960s sit on a concrete slab poured directly on the ground. When Houston's expansive clay soil dries out, floods, or shifts, parts of that slab settle — and the house above it cracks, racks, and slopes. Slab foundation repair stabilizes the settled sections with piers or pilings so the movement stops and the home can be lifted back toward level.
Signs your slab may be settling
- Stair-step cracks in exterior brick or mortar joints
- Interior doors that stick, swing on their own, or no longer latch
- Cracks running across tile, or tile and flooring separating
- Gaps opening between the slab edge and the soil in dry weather
- One side or corner of the house visibly lower than the rest
- Plumbing problems under the slab — settlement can stress drain lines
These signs don't prove you need pier work, but they do justify a free foundation inspection with elevation readings.
How slab foundation repair works
The standard Houston repair is underpinning: support points are installed under the settled part of the slab, down to soil stable enough to carry the load, and the foundation is lifted or stabilized on those supports. The methods you'll hear about locally include:
- Pressed concrete pilings — precast concrete segments hydraulically driven into the ground, segment by segment, until resistance is reached. This is the most common method quoted in Houston.
- Drilled (bored) piers — holes are drilled and filled with reinforced concrete, sometimes with a belled footing at the bottom.
- Steel push piers — steel pipe driven deep to load-bearing strata; common in published national cost guides.
- Helical piers — steel shafts with helical plates screwed into the ground to an engineered torque and depth.
- Interior vs. exterior piers — exterior piers go in from outside the home; interior piers require breaking through the slab inside, which adds cost and disruption but is sometimes the only way to support the middle of a slab.
Piers are typically spaced every 6–8 feet along the affected wall. A typical Houston home that needs repair takes somewhere in the range of 6 to 15 piers, placed only where the elevation survey shows the slab has dropped — not automatically around the whole house.
What slab repair typically costs in Houston
Slab repair is priced mainly per pier, so the pier count is the whole conversation. Published figures for the Houston market:
| Scope | Typical published range |
|---|---|
| Pressed pilings / drilled piers, per pier installed (Houston-area published pricing) | $300–$650 per pier |
| Steel push piers, per pier (national cost guides) | $1,000–$3,000 per pier |
| One settled corner (about 3–5 piers) | $2,500–$4,500 |
| One settled side (about 3–6 piers) | $3,000–$6,000 |
| Full perimeter stabilization (12+ piers) | $8,000–$15,000+ |
| Average Houston foundation repair, all types | About $5,003 (typical $3,276–$6,729) |
Ranges are published third-party figures for planning only — see the cost guide for sources. Your price depends on the pier count and method an inspection recommends. Beware of any quote given without an elevation survey.
Questions to ask before you sign
- Is the pier count based on an elevation survey I can see?
- How deep will the piers go, and how is "deep enough" decided on my soil?
- What warranty covers the piers, and is it transferable if I sell the house?
- Will plumbing be tested before and after the lift? (Lifting can stress old drain lines.)
- Does the price include permits, cleanup, and putting landscaping back?
Get a free slab inspection
Tell us what you're seeing and we'll connect you with a local Houston foundation company for an on-site inspection and written quote — free, with no obligation.
Related services
House leveling · Foundation inspection · Drainage correction · Crack repair · Houston cost guide